05/06/17 - Senior design night
05/03/17 - Third driving test was performed.
04/29/17 - Second driving test was performed.
04/28/17 - First driving test was performed.
04/26/17 - New design for braking system was constructed.
04/28/17 - Fourth oral presentation was performed.
04/21/17 - CEAC Project Review
04/20/17 - New design for steering system was constructed.
04/10-13/17 - Parts were ordered for braking and steering system.
March , 2017 - Utilized documentation software, Vault, for CAD construction. Testing methods for braking system was sketched while ordering materials were searched.
February, 2017 - Team began the CAD drawing for steering system and undertook calculations for braking system.
12/12/16 - Final draft of PPFS was submitted and uploaded online.
12/07/16 - Second oral presentation was performed.
11/22/16 - Team 5 had the fourth meeting with Prof. Van Antwerp.
11/14/16 - Team 5 created the rough draft of its Project Proposal and Feasibility Study (PPFS).
11/08/16 - Team 5 had the third meeting with Prof. Van Antwerp.
11/04/16 - Team 5 created the project poster
10/21/16 - First oral presentation was performed.
10/18/16 - Team 5 had its second meeting with Prof. Van Antwerp.
10/04/16 - Team 5 had its first meeting with senior design adviser, Prof. Van Antwerp.
9/28/16 - The team met with Phil Jasperse, Professor Van Antwerp, and Professor Nielsen to hear about the project background and further advice for a direction.
9/19/16 - Initial specification of the design was sketched.
9/14/16 - The Calvin Bolt 3.0 project was approved.
9/9/16 - Team 5 was formed as a group of four mechanical engineers.